Mid-century style illustration of a smiling woman holding up a colour swatch card on a high street, while a sign writer on a ladder paints a shop sign and a shopkeeper and cream delivery van share matching gold brand details.

How to Create Brand Guidelines That Work on Screen, in Print and on Signage

Brand colours that look right on screen can fail in print. Drawing on 27 years in reprographics, Karen Fuller explains how to create brand guidelines that work in every medium.

I learnt how fragile a brand colour can be in the early 2000s, working in reprographics. Pantone conversions were a regular headache. The same Pantone reference could produce a different CMYK breakdown depending on which version of Adobe Illustrator or Photoshop the artwork had been created in. The colour could then shift again once it was on press. And if a client brought in their own Pantone swatch book to show us the colour they wanted, the result depended on how old that book was. I remember more than one client whose logo colour we had to change, simply because nobody had ever written down exactly what it should be.

You might think this is just a problem for print reproduction. For many businesses today, their brand lives almost entirely on screens: a website, social media, an app, an email newsletter. Their brand colour is a HEX code someone picked from a colour picker because it looked great on their screen. So brand guidelines can feel like something only big companies with print budgets need to worry about.

Then the day comes when they need a print advert, an exhibition banner, a shop sign or a van livery, and the problem comes back with a vengeance. Screens create colour with light, and they can show bright, vivid colours that ink on paper simply can't reproduce. That zingy green or electric blue that looks so good on your website can come back from the printer flat and muddy. Signage adds another layer, because vinyls, paints, illuminated signs and embroidered workwear each have their own colour ranges, so your sign maker has to match your colour to something they can actually produce. Without a written reference for each, every supplier is left to make their own best guess.

In October I wrote about why consistency is the quiet power behind every memorable brand. This article is the practical follow-up: how to actually build brand guidelines that hold up wherever your brand ends up, from a phone screen to the side of a van.

What are brand guidelines?

Brand guidelines are the rulebook for how your brand looks and sounds. They record the decisions about your logo, colours, typography, imagery and tone of voice, so that anyone producing work for you, whether a designer, printer, sign maker, developer or AI tool, starts from the same information.

Step 1: Gather everything you already have

Before you write a single rule, find out what is already out there. I suggest a brand amnesty: collect every version of your logo, every business card, leaflet, sign, social graphic and email footer you can find, and lay them side by side.

Most businesses are surprised. There are usually several logo files of varying quality, a handful of slightly different "brand blues" and at least one document set in a font nobody remembers choosing. This exercise tells you what needs deciding, and it often settles debates quickly, because the best version is usually obvious once everything is in front of you.

Step 2: Get the master artwork right

Guidelines are only as good as the files that come with them. A low-resolution logo saved from a website will never print well, however clear the rules are.

Make sure you have proper master artwork, and know which file suits which job:

Where it's used What your supplier needs
Websites and apps SVG, plus PNG for everyday use
Print Vector EPS, with colours set up for print
Signage and vehicle graphics Vector files, so the logo can be cut from vinyl or scaled to any size
Embroidery on workwear A simplified version with fewer fine details and colours
Favicons and social profiles A small icon version that still reads at tiny sizes

That last point catches many businesses out. A detailed logo that works beautifully on a brochure can turn into an unreadable blob when stitched onto a polo shirt or squeezed into a browser tab. Good guidelines plan for the smallest and the roughest uses, not just the best ones.

Step 3: Specify colour for every material, not just the screen

This is where my years in print make me particularly fussy, and where most brand guidelines fall short. Listing a HEX code and a CMYK value is a good start, but a colour that truly works everywhere needs a little more thought.

Start with the colour you can print, not just the one you can see. If you choose a colour on screen first, check early whether it can be reproduced in CMYK. If it can't, either adjust it or accept that you will need a separate, deliberately chosen print version. Making that decision once, in your guidelines, is far better than letting every printer make it differently.

Know your coated from your uncoated. Pantone colours come in versions for coated (glossy) and uncoated paper, marked C and U. The same ink looks noticeably different on each, so if you print letterheads on uncoated stock and brochures on gloss, specify both.

Use the right reference for each material. Different suppliers work from different systems:

Material What to include in your guidelines
Screen HEX and RGB values
Standard print CMYK values for coated and uncoated stock
Spot colour print Pantone references (C and U) for paper and fabric printing
Painted signage and powder coating RAL K7 or K5 references
Vinyl signage and vehicle graphics The closest match from your sign maker's vinyl range
Embroidery Thread colour references

Approve a physical reference. For important jobs, ask for a printed proof or a sample of the vinyl or thread before the full run, and keep the approved sample as your physical reference. And if you use a Pantone guide, check its age. Pantone itself recommends replacing guides every 12 to 18 months because the swatches fade and yellow, and yellows, oranges and reds fade fastest.

If you'd like to understand why screen and print colours behave so differently, my plain English guide to RGB, CMYK and LAB explains it.

A four-panel comic. A man holds up a laptop showing a bright green swatch, #39D353, and says, "Brand guidelines done! One HEX code. Look at that green, it absolutely pops!" His colleague replies, "Lovely. Now put it on the van." He shrugs, "Why would I care about print? Our brand lives online!" and she holds up a dull green print, "Screens mix light, print mixes ink. Without CMYK, Pantone and RAL values, that green comes back flat and muddy." At Suppliers Ltd., a robot beside a worn swatch book announces, "No colour reference found. Guessing. Guessing again. Guessing differently," as a lime green van labelled "Green?", a dark green polo shirt labelled "Greener?" and an olive banner labelled "Mud?" roll past. Finally the man stares at an olive van outside the window and wails, "Our van is the colour of pond water!" and she says, "Specify a colour for every material. Otherwise every supplier makes their own best guess."

Step 4: Typography, including the licences

Your guidelines should name your typefaces and show how they are used for headings and body text, but there is a practical detail many businesses miss: font licences. A licence to use a typeface on your computer doesn't always cover using it on your website, in an app or by your printer. Record where each font comes from and what its licence covers, so nobody is caught out when a supplier asks for the files.

If you are still choosing, my article on serif vs sans serif looks at the character each brings to a brand.

Step 5: Show your imagery, don't just describe it

Words like "natural", "warm" and "authentic" mean different things to different photographers. The most useful imagery section is visual: a page of photographs that are on brand, and a few that aren't, with a short note on why.

When we created SATU's guidelines (more on those below), we didn't write a paragraph about their photography. We showed it. Every website and social media example used black and white, high-contrast photography, with colour saved for the headline and the brand gold. Anyone looking at those pages could see the rule straight away: the photograph sets the mood, and the brand colours carry the message.

SATU's photography style page. Six black and white photographs with strong directional light, labelled Hair & Beauty or Fashion, sit under the heading On brand. Below them, under Off brand, three crossed-out pictures: posed stock imagery, a filtered photo with a colour cast and a cluttered salon snapshot, each with a note on why it fails. Beside them, lists of what to always and never do.
The photography page from SATU's guidelines, with what is on brand and what is not.

Step 6: Capture your tone of voice

How your brand sounds matters as much as how it looks. A tone of voice section usually describes your personality in a few words, with examples of how to write, and how not to. I covered this in detail in my consistency article, so here I'll add just one tip: include a short "before and after" rewrite of a real piece of your copy. It teaches more than any list of adjectives.

Step 7: Decide how people will find and use them

The traditional format is a PDF, and for many small businesses a clear ten to fifteen page document is plenty. Increasingly, though, brands publish online brand guidelines: a simple web page or portal that is always up to date, with logo files and templates available to download. There is no risk of a supplier working from an old version saved on their desktop three years ago.

Whichever you choose, include ready-made templates for the things you produce most often. A template is a brand guideline people use without needing to read it.

Brand guidelines examples worth studying

Some well-known organisations share their guidelines publicly, and they show how different approaches suit different needs.

  • NHS. The NHS identity guidelines show how a huge organisation keeps thousands of services recognisable, with particular attention to accessibility.
  • GOV.UK. The government's design system goes beyond a style guide to provide ready-built components, so hundreds of services feel familiar and trustworthy.
  • Monzo. A strong example of a brand recognised as much for its friendly, plain English voice as for its distinctive colour.
  • Spotify. Its partner guidelines are very specific about how its logo and colour may be used by others, a useful lesson for any business whose logo appears on partners' websites or stockists' shelves.

From our studio: SATU

In 2020 we created the corporate guidelines for SATU, a Norwich hair and beauty salon with a sister fashion label. It is a good example of a small business whose brand had to work far beyond a website, and the guidelines were built around exactly the problems in this article:

  • One brand, two personalities. SATU Hair & Beauty used an outlined version of the logo, while SATU Fashion used a solid version. Both shared the same letterforms, typeface and colours, so they were clearly one family.
  • A colour that can't be printed in CMYK. The brand colour was Pantone 874, one of Pantone's metallic golds. No screen or four-colour press can truly reproduce a metallic, so the guidelines gave a HEX value for digital, a CMYK build for everyday print, and the Pantone itself for the jobs where it mattered.
  • Coated and uncoated specified separately. The appointment cards were printed on a textured, uncoated pulp board, so they were specified in 874 U rather than 874 C, along with the board, weight and size.
  • Logos designed for the material. A reversed version of the logo was drawn specifically for foil blocking, screen printing and embroidery, and a stand-alone "S" icon was provided for social media and any use too small for the full logo to read.
  • A highlight colour with rules. A bright yellow accent added energy to the website and social posts, with a clear instruction to use it sparingly and never as the main colour.
  • A checklist at the end. The final page was a simple validation checklist covering logo, colours and typography, so anyone producing work could check it before it went out.
SATU's brand colours page. Pantone 874 C gold, 90% black and 5% black are each shown with 75, 50 and 25 percent tints and their Pantone, web, CMYK and RGB values, with the note: where possible always use the CMYK references when printing. Below, Pantone 396 C yellow is the highlight colour, only used sparingly and never as the main colour.
SATU's colours, each with a value for screen, print and Pantone.
Two pages from SATU's guidelines. The logo page shows the outlined gold Hair & Beauty logo, a reversed version for foil blocking and screen printing, the minimum logo size with the stand-alone S icon, black and white versions, and squeezed, stretched and recoloured logos marked Do not. The appointment card page shows the charcoal card outside and inside, specified at 85 by 110 mm folded on 300gsm textured pulp board, printed in grey and Pantone 874 U gold.
SATU's logo versions and the appointment card specification, in Pantone 874 U for uncoated board.

Your guidelines now brief AI as well as people

In Your Website Now Has Two Audiences, I wrote about AI reading your website. AI is now creating brand material too, and it has the same weakness as a new supplier: it only knows what it is told.

You can see this on our own website. Every article we publish, including this one, carries an illustration in the same 1950s mid-century style, and we create those illustrations with AI image tools. We brief the AI in exactly the same way we would brief an illustrator: the era, the palette, the mood and the kind of scene we want. The onus is on us to put our vision into words. Left to its own devices, AI produces something generic. Briefed properly, it produces something that looks like Accent.

The same applies to client work. We have found that when we give an AI design tool precise colour values, named typefaces, imagery rules and tone of voice, the results look like the client. When we don't, they look like everyone else. The more exact your guidelines, the more useful they become as a brief for both people and machines.

Frequently asked questions

What should be included in brand guidelines?

At a minimum: your logo and its variations, a colour palette with values for screen and print, your typefaces, imagery style and tone of voice. The most useful guidelines also include master artwork files, templates and examples of the brand in use.

How do I create brand guidelines for a small business?

Gather all your existing material, decide on the definitive versions of your logo and colours, get proper master artwork, specify colours for every material you use, then write the rules down simply with examples. A designer can help ensure the technical details are right.

How long should brand guidelines be?

For most small businesses, ten to fifteen clear pages is plenty. Large organisations may need far more. Clarity matters more than length.

Should brand guidelines be a PDF or online?

A PDF works well for smaller businesses. Online guidelines are easier to keep up to date and to share with suppliers, and they can include downloadable files and templates.

Why does my brand colour look different in print?

Screens mix light, while print mixes ink, and some bright screen colours can't be reproduced with ink. Paper type, printing method and the age of colour references all add variation. Specifying separate, approved values for print avoids surprises.

A note on how this article was produced. The editorial position taken here is Karen Fuller's own, drawn from her hands-on work in print, reprographics, photography and design. AI tools were used to help research keywords, verify facts and shape the author's views into a working draft. Every claim was checked, and the final text was reviewed and edited by a person, who takes responsibility for it.